CUTOPIX
Application

Garment & Textile

Cutting solutions for garment and textile production, including webbing, ribbon, Velcro, elastic bands, nylon and polyester straps, lanyards, rope and other flexible materials.
Garment & Textile Application Guide

How to Select Cutting Equipment for Webbing, Ribbon & Textile Materials

Textile converting applications vary by material width, thickness, elasticity, edge behavior and required finished shape. Hot cutting, cold cutting, angle cutting, shaped cutting and punching should be selected according to the actual product.

Typical Materials

What Materials Are Commonly Processed?

✓ Nylon and polyester webbing
✓ Ribbon and narrow textile tape
✓ Velcro / hook & loop materials
✓ Elastic bands and flexible straps
✓ Lanyards, rope and related textile products
Typical Applications

What Production Tasks Are Common?

✓ Hot cutting with edge sealing
✓ Cold straight length cutting
✓ Angle and bevel cutting
✓ Round, wave and other shaped cutting
✓ Punching, marking and cutting in one workflow
Machine Selection

What Should You Confirm Before Choosing a Machine?

✓ Material width, thickness and elasticity
✓ Whether the cut edge must be heat sealed
✓ Straight, angle, round, wave or other required shape
✓ Finished length, tolerance and target speed
✓ Any punching, marking or counting requirement
Custom Solutions

Can the Equipment Be Customized?

CUTOPIX can review hot-knife, cold-knife, angle-cutting, shaped-cutting, punching, marking and special feeding configurations for different textile converting requirements.

Application FAQ

Questions Buyers Often Ask

01 Should I choose hot cutting or cold cutting for webbing?
+

Hot cutting is commonly used for suitable synthetic webbing when edge sealing is required. Cold cutting is appropriate when heat is unnecessary or unsuitable.

02 Can hot cutting help prevent webbing from fraying?
+

Yes. For suitable nylon and polyester materials, the heated blade can melt and seal the cut edge.

03 Can the machine cut ribbon automatically?
+

Yes. Ribbon can be automatically fed and cut to preset lengths when the material and required edge finish are suitable.

04 Can Velcro or hook-and-loop material be cut and punched?
+

Yes. Straight cutting, shaped cutting and punching solutions can be evaluated for suitable hook-and-loop products.

05 Can the machine cut elastic bands accurately?
+

Yes, but elastic materials can stretch during feeding, so feeding pressure and speed should be matched to the material.

06 Can it make 30°, 45°, 60° or other angle cuts?
+

Yes. Angle-cutting configurations can be reviewed according to the required angle, material width and edge finish.

07 Can round or wave shapes be cut automatically?
+

Yes. Shaped cutting solutions are available for suitable products and can be evaluated from a drawing or sample.

08 Can punching and cutting be combined in one cycle?
+

Yes. For suitable products, punching and final cutting can be integrated with automatic feeding.

09 Can one machine process different widths of webbing?
+

Usually yes within the supported width range, although feeding and tooling should be checked for each material.

10 What should I send for a machine recommendation?
+

Please provide material type, width, thickness, roll format, required length or shape, edge requirement, target speed and any punching or marking needs.

Explore Other Applications

Explore cutting solutions for other industries, materials and production applications.

Automotive & Electronics (7) Industrial (18) Medical & PPE (4) Packaging (14) Solar PV & New Energy (5)

Not Sure Which Machine Fits Your Application?

Send us your material, dimensions, finished-product requirements and target production speed. CUTOPIX can review the application and recommend a suitable cutting or punching configuration.

Request Consultation WhatsApp Contact
Footer Component
WhatsApp Chat Email Inquiry