CUTOPIX
Industrial Cutting Solution New Energy Material Cutting Machines

PVC Film Roll-to-Sheet Cutting Machine HX-1200

Automatic PVC film roll-to-sheet cutting machine for wide-format roll materials up to 1200mm.

Application-specific cutting configuration
Material testing before order confirmation
OEM / non-standard customization support
Remote technical and after-sales support
Discuss Your Material on WhatsApp
PVC Film Roll-to-Sheet Cutting Machine HX-1200
Model
HX-1200
Cutting Method
Cold
Model
HX-1200
Cutting Length
1-9999mm
Cutting Width
1-1200mm
Thickness
0.01-4mm(others can custom)
Engineering Overview

What Is This Machine Designed to Do?

Understand the machine logic, suitable materials, process capability and application scope before comparing configurations.

Material Matched Application Reviewed Configuration Confirmed
Before Configuration Review
✓ Material type
✓ Width & thickness
✓ Required cut size
✓ Target output

The HX-1200 converts wide PVC film rolls into sheets of preset length through automatic feeding, length measurement and cutting. Operators can set the required cutting length and quantity according to the production job, allowing continuous roll-to-sheet processing with less manual handling.

With a working width of up to 1200mm, the machine is suitable for wide flexible roll materials used in packaging, insulation, protective materials and industrial converting applications. In addition to PVC film, compatible EVA, EPE, PET film, bubble wrap and other flexible materials can also be tested and configured according to thickness, structure and required cutting quality.

Cutopix Automatic Bubble Wrap Roll to Sheet Cutting Machine
Why This Configuration

Match the Machine to the Production Requirement.

A suitable cutting machine should match the actual material, production workflow and required finished result — not just a catalog specification.

01

Material Fit

Review material type, width, thickness, structure and cutting behavior before confirming the machine configuration.

Material
02

Process Fit

Confirm that feeding, positioning, cutting and collection match the required production sequence and handling method.

Workflow
03

Output Fit

Evaluate required dimensions, cut quality and target output so the final setup matches the intended production result.

Result
Process Flow

How the Machine Works

A clear process view helps engineering and purchasing teams evaluate whether the machine fits their production flow.

01

Load Material

Install the roll, strip, sheet or workpiece according to the machine configuration.

02

Set Parameters

Set length, quantity, speed or processing parameters through the control system.

03

Automatic Processing

The feeding and cutting / punching sequence runs according to the programmed settings.

04

Collect & Inspect

Finished parts are collected and checked for size, shape and cutting quality.

Machine Video

See the Machine in Action

Watch a real machine-running video to review feeding, cutting performance, finished results and operating flow before confirming the final configuration.

Feeding & handling
Cutting action
Finished result
Operating sequence
Technical Specifications

Core Machine Parameters

Use these values for a quick engineering review. Final speed and configuration should be confirmed with the actual material and required finished result.

Model
HX-1200
Cutting Length
1-9999mm
Cutting Width
1-1200mm
Material Thickness
0.01-4mm(others can custom)
Cutting / Blade Type
Cold
Suitable Materials
EPE Foam, Pearl Cotton, EVA Foam, PVC Sheet, PET Film, Bubble Wrap, Kraft Paper, Insulation Foam, Rubber Sheet
Technical reference image. Final configuration follows the confirmed application.
Confirm Before Ordering
Need a recommendation based on your width, thickness and target speed?
WhatsApp Us
Engineering Details

Machine Details That Matter in Production

Look beyond the full machine photo. Buyers often want to understand the cutting unit, feeding system, control interface and material handling details.

Detail 01

Cutting Unit / Blade Area

Core processing area for cutting, punching or die-cutting according to the machine type.

Detail 02

Automatic Feeding System

Supports stable material movement and repeatable positioning during continuous production.

Detail 03

Control & Parameter Setting

Operators can set length, quantity, speed and related process parameters from the control interface.

Customization Options

Configure the Machine Around Your Production.

Instead of forcing your material into a fixed catalog model, CUTOPIX can review the key process conditions and adapt the configuration where required.

Typical Customization Requests
Cutting Method Working Width Feeding Sensors Voltage Rewinding
?
Not sure which option fits your production?

Send material photos, width, thickness and your target cutting result for configuration review.

WhatsApp About Customization
◇
Application
Matched
⚙
Engineering
Reviewed
✓
Configuration
Confirmed
Available Customization
01

Cutting Method

Hot / cold / blade / punching / die-cutting according to application.

02

Working Width & Length

Standard range or project-specific dimension review.

03

Feeding System

Standard feeding, unwinding and tension-control options.

04

Punching / Tooling

Custom dies, hole patterns, cutting shapes and fixtures.

05

Control Logic

PLC / servo / sensor-linked process sequence customization.

06

Electrical Standard

110V / 220V / 380V and 50/60Hz by destination.

07

OEM Branding

Machine label, logo and project-specific identification.

08

Collection / Rewinding

Collection, rewinding or downstream handling options.

Testing Before Shipment

From Customer Sample to Shipment Confirmation

For customized machinery, verification should happen before the machine leaves the factory. The process below helps reduce uncertainty for overseas buyers.

01

Customer Sample

Receive material samples, drawings or detailed process requirements.

02

Machine Setup

Adjust feeding, cutting, tooling and control parameters for the application.

03

Material Test

Run the actual material and inspect cutting quality, dimensions and stability.

04

Video Confirmation

Share running videos and finished samples for buyer confirmation when required.

05

Packing & Shipment

Complete final inspection, secure packing and shipment preparation.

✓ Cutting Quality
✓ Size & Accuracy
✓ Continuous Running
✓ Electrical / Safety Check
Material Capability

Compatible Materials & Cutting Samples

Review suitable materials and real cutting samples in one place. Final compatibility should be confirmed according to material thickness, structure and required cutting quality.

EPE Foam Pearl Cotton EVA Foam PVC Sheet PET Film Bubble Wrap Kraft Paper Insulation Foam Rubber Sheet
Not sure whether your material can be processed?

Send the material name, width, thickness and a photo or sample for application review.

WhatsApp About Your Material
Cutting Performance

See the Cutting Result, Not Just the Machine.

For industrial buyers, the finished cut matters more than a catalog image. This section connects the material, the processing step and the resulting part.

PVC Film Roll-to-Sheet Cutting Machine HX-1200 input material before cutting
Step 01

Input Material

EPE Foam, Pearl Cotton, EVA Foam, PVC Sheet, PET Film, Bubble Wrap, Kraft Paper, Insulation Foam, Rubber Sheet and similar flexible materials are prepared for stable feeding and cutting.

PVC Film Roll-to-Sheet Cutting Machine HX-1200 automatic cutting process
Step 02

Automatic Processing

Material is automatically fed, positioned and cut according to the programmed length, quantity and process settings.

PVC Film Roll-to-Sheet Cutting Machine HX-1200 finished cutting result
Step 03

Finished Result

Finished pieces are reviewed for dimensions, cutting quality, edge condition and production consistency.

Clean Cutting Result
Repeatable Dimensions
Automatic Feeding
Finished-Part Inspection
Application Scenarios

Where This Machine Fits in Real Production

See how this machine fits real production requirements, material handling and finished-product applications.

Manufacturing Partner

Why Industrial Buyers Work With CUTOPIX

Manufacturing resources, assembly, electrical integration and quality control — practical proof behind every machine project.

Factory

Manufacturing & Engineering Capability

CUTOPIX specializes in the development and manufacturing of automatic cutting and punching equipment for flexible materials. Our production capabilities cover machine assembly, electrical integration, customized tooling, testing and quality inspection. Each machine can be configured according to the customer's material, cutting size, production process and automation requirements.

Industry Presence

Global Exhibitions & Industry Experience

We participate in industry exhibitions to present our cutting solutions and communicate directly with customers from different markets. These face-to-face exchanges help us better understand real production requirements and continuously improve our machines for different materials, applications and industries.

Customer Feedback

Trusted by Customers Worldwide

Our machines are used by customers in different industries and markets around the world. Customer feedback, repeat orders and real production results help demonstrate the reliability of our equipment and service. We value long-term cooperation and continue to provide technical support after delivery.

FAQ

Questions Industrial Buyers Usually Ask

Practical answers about materials, cutting capability, configuration and purchasing this machine.

01 What materials can the HX-1200 roll-to-sheet cutting machine process?
The HX-1200 is designed for roll-to-sheet cutting of flexible materials such as PVC film, PET film, EVA, EPE and other compatible roll materials. Material thickness, flexibility and surface characteristics can affect the recommended machine configuration. We recommend sending a material photo, specifications or sample for confirmation before ordering.
02 Can the HX-1200 automatically cut PVC film rolls into sheets?
Yes. The HX-1200 can automatically feed PVC film from a roll, measure the preset length and cut it into individual sheets. The operator can set the required cutting length and quantity according to the production job, reducing repetitive manual measuring and cutting.
03 What is the maximum cutting width of the HX-1200?
The HX-1200 supports a working width of up to 1200 mm（better in 1080mm）, making it suitable for wide PVC film and other flexible roll materials. If your material has a special width, thickness or roll size, please send us the specifications so we can confirm the suitable feeding and cutting configuration.
04 How does the automatic roll-to-sheet cutting process work?
The material roll is loaded onto the feeding system and guided into the machine. After the cutting length and quantity are set, the HX-1200 automatically feeds the material to the required length and performs the cutting cycle. This allows continuous roll-to-sheet processing with consistent sheet dimensions and less manual handling.
05 Can the cutting length and quantity be adjusted?
Yes. The cutting length and production quantity can be set according to different job requirements. Once the parameters are entered, the machine automatically feeds and cuts the material based on the selected settings, making it convenient to switch between different sheet sizes and production batches.
06 Can the HX-1200 also cut EVA, EPE and PET materials?
Yes. In addition to PVC film, the HX-1200 can be configured for compatible materials such as EVA, EPE and PET. Because these materials can vary in thickness, density, flexibility and roll condition, the actual cutting result should be confirmed according to the specific material. Sample testing is available before order confirmation.
07 Can you test my EVA, EPE, PET or PVC material before I order?
Yes. Customers can provide representative material samples for cutting tests. We can evaluate feeding behavior, cutting performance and the finished result to help confirm whether the standard HX-1200 configuration is suitable or whether customization is required.
08 What information should I provide to choose the right foam cutting machine?
Please provide the material name, thickness, maximum width, roll diameter or roll weight, required cutting length and expected production output. Photos or videos of the material are also helpful. For special applications, you can send material samples for cutting tests before the machine configuration is confirmed.
Discuss Your Application

Tell Us What You Need to Cut

The fastest way to recommend a suitable machine is to understand your material and finished cutting requirement.

01Material name, width and thickness
02Required cutting length, shape or punching method
03Target output or production requirement
04Voltage and any custom automation requirement
Send Photos / Drawings on WhatsApp

For photos, drawings or sample details, you can also send them through WhatsApp after submitting the form.

Related Equipment

Compare Other Machines in This Series

Footer Component
WhatsApp Chat Email Inquiry