Webbing Straight & Bevel Hot Cutting Machine HX-CHS05
This Webbing Cutting Machine performs hot cutting and beveling on polyester, nylon and polypropylene webbing up to XX mm width…
View machine →
Industrial Cutting Solution
Webbing & Ribbon Tape Cutting Machines
Automatic Velcro Round Shape Cutting Machine HX-CHS02
Specialized Die Cutting Machine for Velcro Dots (Coins) and Circular Shapes. The HX-CHS02 is an automatic punching machine designed to cut Hook and Loop (Velcro) tapes, adhesive foams, and double-sided tapes into precise round shapes (coins) or other custom geometries. Using a customized die mold, it punches continuously from the roll material. It is the […]
Application-specific cutting configuration
Material testing before order confirmation
OEM / non-standard customization support
Remote technical and after-sales support
Model
HX-CHS02
Cutting Method
Cold
Model
HX-CHS02
Cutting Length
1-9999mm
Cutting Width
1-95mm
Thickness
0.01-4mm(others can custom)
Engineering Overview
What Is This Machine Designed to Do?
Understand the machine logic, suitable materials, process capability and application scope before comparing configurations.
Material Matched
Application Reviewed
Configuration Confirmed
Before Configuration Review
✓
Material type
✓
Width & thickness
✓
Required cut size
✓
Target output
Specialized Die Cutting Machine for Velcro Dots (Coins) and Circular Shapes. The HX-CHS02 is an automatic punching machine designed to cut Hook and Loop (Velcro) tapes, adhesive foams, and double-sided tapes into precise round shapes (coins) or other custom geometries. Using a customized die mold, it punches continuously from the roll material. It is the […]
Why This Configuration
Match the Machine to the Production Requirement.
A suitable cutting machine should match the actual material, production workflow and required finished result — not just a catalog specification.
01
Material Fit
Review material type, width, thickness, structure and cutting behavior before confirming the machine configuration.
Material
02
Process Fit
Confirm that feeding, positioning, cutting and collection match the required production sequence and handling method.
Workflow
03
Output Fit
Evaluate required dimensions, cut quality and target output so the final setup matches the intended production result.
Result
Process Flow
How the Machine Works
A clear process view helps engineering and purchasing teams evaluate whether the machine fits their production flow.
01
Load Material
Install the roll, strip, sheet or workpiece according to the machine configuration.
02
Set Parameters
Set length, quantity, speed or processing parameters through the control system.
03
Automatic Processing
The feeding and cutting / punching sequence runs according to the programmed settings.
04
Collect & Inspect
Finished parts are collected and checked for size, shape and cutting quality.
Technical Specifications
Core Machine Parameters
Use these values for a quick engineering review. Final speed and configuration should be confirmed with the actual material and required finished result.
Model
HX-CHS02
Cutting Length
1-9999mm
Cutting Width
1-95mm
Material Thickness
0.01-4mm(others can custom)
Cutting / Blade Type
Cold
Suitable Materials
Velcro Tape, Hook and Loop, Velcro Dots, Velcro Coins, Adhesive Tape, EVA Foam, Felt Pad, Double-sided Tape, 3M Tape, Non-woven Fabric
Confirm Before Ordering
Need a recommendation based on your width, thickness and target speed?
Customization Options
Configure the Machine Around Your Production.
Instead of forcing your material into a fixed catalog model, CUTOPIX can review the key process conditions and adapt the configuration where required.
Typical Customization Requests
Cutting Method
Working Width
Feeding
Sensors
Voltage
Rewinding
?
Not sure which option fits your production?
Send material photos, width, thickness and your target cutting result for configuration review.
◇
Application
Matched
Matched
⚙
Engineering
Reviewed
Reviewed
✓
Configuration
Confirmed
Confirmed
Available Customization
01
Cutting Method
Hot / cold / blade / punching / die-cutting according to application.
02
Working Width & Length
Standard range or project-specific dimension review.
03
Feeding System
Standard feeding, unwinding and tension-control options.
04
Punching / Tooling
Custom dies, hole patterns, cutting shapes and fixtures.
05
Control Logic
PLC / servo / sensor-linked process sequence customization.
06
Electrical Standard
110V / 220V / 380V and 50/60Hz by destination.
07
OEM Branding
Machine label, logo and project-specific identification.
08
Collection / Rewinding
Collection, rewinding or downstream handling options.
Testing Before Shipment
From Customer Sample to Shipment Confirmation
For customized machinery, verification should happen before the machine leaves the factory. The process below helps reduce uncertainty for overseas buyers.
01
Customer Sample
Receive material samples, drawings or detailed process requirements.
02
Machine Setup
Adjust feeding, cutting, tooling and control parameters for the application.
03
Material Test
Run the actual material and inspect cutting quality, dimensions and stability.
04
Video Confirmation
Share running videos and finished samples for buyer confirmation when required.
05
Packing & Shipment
Complete final inspection, secure packing and shipment preparation.
✓
Cutting Quality
✓
Size & Accuracy
✓
Continuous Running
✓
Electrical / Safety Check
Material Capability
Compatible Materials & Cutting Samples
Review suitable materials and real cutting samples in one place. Final compatibility should be confirmed according to material thickness, structure and required cutting quality.
Velcro Tape
Hook and Loop
Velcro Dots
Velcro Coins
Adhesive Tape
EVA Foam
Felt Pad
Double-sided Tape
3M Tape
Non-woven Fabric
Not sure whether your material can be processed?
Send the material name, width, thickness and a photo or sample for application review.
Manufacturing Partner
Why Industrial Buyers Work With CUTOPIX
Manufacturing resources, assembly, electrical integration and quality control — practical proof behind every machine project.
Factory
Manufacturing & Engineering Capability
CUTOPIX specializes in the development and manufacturing of automatic cutting and punching equipment for flexible materials. Our production capabilities cover machine assembly, electrical integration, customized tooling, testing and quality inspection. Each machine can be configured according to the customer's material, cutting size, production process and automation requirements.
Industry Presence
Global Exhibitions & Industry Experience
We participate in industry exhibitions to present our cutting solutions and communicate directly with customers from different markets. These face-to-face exchanges help us better understand real production requirements and continuously improve our machines for different materials, applications and industries.
Customer Feedback
Trusted by Customers Worldwide
Our machines are used by customers in different industries and markets around the world. Customer feedback, repeat orders and real production results help demonstrate the reliability of our equipment and service. We value long-term cooperation and continue to provide technical support after delivery.
Discuss Your Application
Tell Us What You Need to Cut
The fastest way to recommend a suitable machine is to understand your material and finished cutting requirement.
01Material name, width and thickness
02Required cutting length, shape or punching method
03Target output or production requirement
04Voltage and any custom automation requirement
Related Equipment
Compare Other Machines in This Series
Automatic Elastic Band Cutting Machine HX-CHS95ML
Precision Cutting Solution for Elastic Bands, Webbing, and Ribbons. The HX-CHS95ML is an automatic cutting machine specialized for the garment…
View machine →
Automatic Hot & Cold Ribbon Cutting Machine HX-95M
2-in-1 Hot and Cold Cutting Machine for Labels, Ribbons, and Plastic Tubes. The HX-95M is a versatile "All-in-One" automatic cutter…
View machine →