Automatic roll-to-sheet cutting solutions for paper, bubble wrap, nonwoven and selected flexible roll materials. Match the feeding and cutting configuration to your material instead of forcing every roll through the same setup.
Prefer email? Send your requirements →A Roll-to-Sheet Cutter Is More Than a Blade.
The real question is whether the roll can unwind, feed, stay aligned and cross-cut consistently at your required sheet length.
The working width must match the actual roll, including any required guiding clearance.
Paper, bubble wrap and soft nonwoven behave differently during feeding and pressure contact.
Confirm the required cut length, batch quantity and whether several sizes are produced.
Roll condition, weight, surface friction and softness can change the required feeding setup.
The cutting method should be reviewed according to the material and required finished edge.
Collection, downstream handling and optional process requirements should be reviewed together.
Automatic Bubble Wrap Cutting Machine Solution
For customers converting air bubble film from rolls into fixed-length sheets, the machine can automate repeated measuring, feeding and cross cutting. The HX-500 is a key option for bubble wrap and related packaging materials.
Cutting bubble wrap?
Send the roll width, bubble structure and required sheet length for a faster configuration check.
Different Roll Materials Need Different
Feeding & Cutting Setups.
The roll-to-sheet process may look similar, but material structure, roll width, thickness and feeding behavior can require different machine configurations. Final compatibility is confirmed from the actual material specification or sample.
Examples of roll materials that can be evaluated for cutting and roll-to-sheet conversion.
Bubble Wrap
Bubble wrap and air bubble film rolls converted into repeatable, preset-length sheets for packaging applications.
Paper Rolls
Kraft paper, release paper, filter paper and other paper rolls that need automatic feeding and preset-length sheet cutting.
Nonwoven Rolls
Soft nonwoven and spunlace rolls where stable unwinding, feeding and material control require extra attention.
Selected Film & Flexible Rolls
Selected plastic film and flexible roll materials can be evaluated when the application requires roll-to-sheet conversion.
Start With the Roll Width and Material.
Use this as a first comparison only. The final machine should be confirmed after reviewing the actual roll and finished-sheet requirement.
Quick Selection
Instead of choosing only by model number, start from what you need to convert.
Ask for a RecommendationMatch the Machine to the Roll — Not the Other Way Around.
Send the material, maximum roll width and required sheet length. We can quickly narrow down the suitable HX model and feeding setup.
Choose the Machine by Material and
Working Width.
These are existing CUTOPIX roll-to-sheet machines. HX-500 is the featured bubble-wrap option; HX-1000 focuses on paper and nonwoven rolls, while HX-1200 and HX-1500 extend the range for wider materials.
HX-500 Bubble Wrap Roll-to-Sheet Cutter
Automatic cold-cutting solution for bubble wrap and compatible packaging rolls. The product page also lists PVC, PET and PE film, EPE/EVA foam, plastic sheeting and paper materials.

HX-1000 Paper & Nonwoven Roll-to-Sheet Cutter
Designed for nonwoven and paper converting. Current product applications include kraft paper, release paper, filter paper, gift wrapping paper and flexible nonwoven materials.

HX-1200 PVC Film Roll-to-Sheet Cutting Machine
Wide-format roll-to-sheet model for PVC film and compatible flexible materials. CUTOPIX also lists PET film, EVA/EPE, bubble wrap and kraft paper among materials that can be evaluated for this machine.

HX-1500 Kraft Paper & Film Roll-to-Sheet Cutter
Extra-wide option for large-format paper and plastic-film converting. The current product page lists kraft paper, PVC film, PET sheet, release paper, insulation paper and nonwoven among suitable applications.
Not sure which machine fits your roll?
Tell us the material and roll width. We can help narrow down HX-500, HX-1000 or a wider configuration.
Build Only the Functions Your Material Actually Needs.
Feeding, slitting, photoelectric sensing, static elimination, sealing and punching can be evaluated as part of one non-standard configuration.
Reduce Risk Before the Machine Reaches Your Factory.
A roll-to-sheet project is not only about cutting width. We review the actual material, feeding behavior and finished-sheet requirement before the final configuration is confirmed.
Sample Testing
Actual roll material can be tested before order when required.
Configuration Matching
Working width, feeding and cutting setup are selected around the application.
Custom Solutions
Unwinding, feeding and other process details can be reviewed for non-standard needs.
Video Confirmation
Machine operation and sample results can be reviewed before shipment.
After-Sales Support
Operation guidance and technical support continue after delivery.
Real Applications Deserve Real Customer Proof.
See verified CUTOPIX customer feedback and real project experience from customers using our cutting machine solutions.
Feedback shown above comes from actual CUTOPIX customer communications and machine projects.
Show the Roll Before Cutting — and the Finished Sheet After.
These three visual proof points help buyers judge the application faster than machine specifications alone. Keep the images focused on the actual material and finished cut result.

Bubble Wrap Cutting Result
Use a real image showing bubble wrap before cutting and the preset-length sheets after cutting.

Paper Roll-to-Sheet Result
Use a real paper roll and finished sheet photo so buyers can see the converting result clearly.

Nonwoven Cutting Result
Use a real nonwoven or other verified flexible-roll sample and its finished cut pieces.
Set the Length. Let the Machine Repeat the Cycle.
The core roll-to-sheet workflow is simple to understand, while the correct feeding configuration depends on the material.
Load
Install the roll and prepare the unwinding / feeding path.
Program
Set the required sheet length and production quantity.
Feed
The material advances according to the configured feeding system.
Cut
Cross cut and repeat until the programmed batch is complete.
Send the Actual Roll Material for a Cutting Test.
This is especially useful for soft, lightweight, compressible or unusual materials. Testing lets the feeding behavior and finished sheet result be reviewed before the final configuration is confirmed.
Roll-to-Sheet Cutting Questions
What is a roll-to-sheet cutting machine?
It converts continuous roll material into individual sheets of a preset length by combining unwinding or feeding with repeated cross cutting.
Can the machine cut bubble wrap from a roll into sheets?
Yes. CUTOPIX lists bubble wrap / air bubble film as a key application for the HX-500. Send the roll width, material structure and required sheet length so the configuration can be reviewed.
Which machine is suitable for paper roll-to-sheet cutting?
The HX-1000 is one option for paper and nonwoven roll-to-sheet applications, with a confirmed 1000 mm working width. Final selection should still be based on the actual paper type, roll condition and finished sheet requirement.
Can one roll-to-sheet machine cut different materials?
Potentially, but material compatibility depends on width, thickness, softness, surface friction, roll condition and the required cut result. If you plan to process several materials, provide details or samples for each one.
How do I choose between HX-500 and HX-1000?
Start with material type and maximum roll width. HX-500 has a confirmed 500 mm working width and is a key bubble-wrap option; HX-1000 has a confirmed 1000 mm working width and is positioned for paper, nonwoven and other flexible rolls.
Can the cutting length and quantity be preset?
Yes. The roll-to-sheet process is designed around setting the required cutting length and production quantity, then repeating the feeding and cutting cycle automatically within the machine's applicable range.
What information should I send for a machine recommendation?
Send the material name, roll width, thickness or material structure, roll details, required sheet length, target quantity or output, and photos or samples when available.
Can CUTOPIX test my material before I order?
Yes. Material testing can be arranged to review feeding stability, cutting behavior and the finished sheet result before the final machine configuration is confirmed.
Get a Machine Recommendation Based on Your Actual Material.
Photos or samples are welcome, but not required for the first inquiry.





